The Polaris is an 18 LED IP68 fixture suitable for many in-water installations down to 3 meters/9.8 feet. It is made with 316 non-rusting stainless steel.
The Polaris is primarily an In-Ground uplight for residential/office walk ways, driveways, and deck/patios; for public walk ways and other municipal loactions; as in-water lighting for fountains, water falls and ponds; in gardens, as accent uplighting of trees and shrubs. Many have installed the Polaris in shower/bath ceilings, in concrete and stone walls that have steps.
Installation Notes. The Polaris includes a 'plug' or "pouring form" for in-stone wall or paver or concrete installations. The Polaris is inserted into the plug after the proper wire connections have been performed. Allow at least 12" extra lead length for possible removal and replacement of the Polaris should it become necessary for repairs/replacement during its 1 year warranty. See Polaris instruction and dimensions for the Polaris and installation 'Plug'. |
Specifications
are:
Light Source: 18 high bright White and colored LEDs
Lumen: 40 lumen white; colors estimated at 30 lumen
Light Output: estimated at 15 watts
Power Consumption: 180mA - 1.3 watts per Polaris Fixture
Lens: Clear
Dimensions: 85mm/3.4 inches L with a diameter of 55mm/2.2 inches.
Power Cord: 36" power cord
Housing: Rust-Proof 316 Stainless Steel.
Warranty: 1 Year Pro-Rated if a dimmer is also purchased!
UL Certified |
| This product requires a dimmer even if you will not use the dimming function. The dimmer contains a PWM/pulse width modulation component which will allow maximum life of the LEDs. Installation of a dimmer activates Your Warranty for 1 year. |
| If you install more than 6 fixtures, follow this wiring diagram! |