NorthStar Brite and Glow Series

The NorthStar Brite has a clear diamond pattern diffuser face. The NorthStar Glow has a translucent frosted face. 4 or 8 30-40 degree or 40-50 degree LEDs.

• Excellent for high moisture areas, but NOT submersible! Only Weatherproof.
• Made from tough UL 94-VO Flame Retardant ABS plastic. White only.
• Soft focal lighting, 40 deg LED model
• Extremely low 0.125" profile with beveled edge
• Excellent as guide and perimeter light around pools, walkways, decks, stairs
• Excellent night lighting from ceiling in hallway, atrium, bathroom, kid's bedrooms, kitchen, theater room
• Excellent for spot lighting interior and exterior plants
• Excellent accent/ambient lighting for RVs, boats
• Very cool light for shelves and open cabinets. Highlight smaller objects
• Dimensions:
      SB4/SG4 have 1.62" bezel diameter x 1.22" high. Bezel is .125" thick. Stem diameter is 1.12" x .1.064" high - install in a 1 1/8"      diameter hole
      SB8/SG8 have 1.875" bezel diameter x 1.22" high. Bezel is .125" thick. Stem diameter is 1.37" x .1.062" high - install in a 1 3/8"      diameter hole
  
• Available in appliance white only! Face only can be colored with latex paint to match after fine sanding

• Input Voltage: 12vdc
• Operating Voltage: 11.5 to 12.5vdc Maximum
• Dimmable with 12vdc dimmer
• LED Output: NorthStar Brite 4 each 40-50° - 6500mcd Cool white@ 22mA - 5 watts/90 lumen - Floodlight
• LED Output: NorthStar Glow 4 each 40-50° - 6500mcd Cool white@ 22mA - 4 watts/80 lumen - Floodlight
• LED Output: NorthStar Brite 8 each 40-50° - 6500mcd Cool white@ 22mA - 7 watts/160 lumen - Floodlight
• LED Output: NorthStar Glow 8 each 40-50° - 6500mcd Cool white@ 22mA - 6 watts/130 lumen - Floodlight
• LED Output: NorthStar Glow-WW 8 each 30-40° - 6000mcd WARM white@ 22mA - 2.5 watts/50 lumen - Floodlight
• Wire Lead length: 6"
• This item requires the installation of a dimmer between a regulated transformer and a dimmer for 3 or more NorthStars. The dimmer does not need to be operated, just left at full on, because it is necessary to have the LEDs live a long life. The warranty is voided if a dimmer is not installed.
  
  See What Is... for the definition of PWM. Your Warranty is for 1 year. And, if you install multiple fixtures, follow this wiring diagram to help balance the current flow to all fixtures.